OFFLINE

im about to buy Rockford Fosgate T1D212 and i dont know what amp or amps i should get, i want a booming system, and im only going to have about 1000 to spend out it, i know i want these speakers, but idk what amp i need.

OFFLINE

How many T1D212's were you looking to run?

OFFLINE

i was planing on running 2 of them

OFFLINE

For two T1D212's I would recommend using one T1500-1BDCP, make sure you wire the set to a 2 ohm load.

OFFLINE

You can get a better system for 1000 then some T1s if you really wanted to. but yes a T1500-1BDCP would power those T1s perfectly. make sure your electrical can handle that 1500+ watts and if not i recommend upgrading your electrical before putting that system in. 1500 watts at full tilt can pull more then most stock alts can handle.

OFFLINE

Originally Posted by Steve Terry:
For two T1D212's I would recommend using one T1500-1BDCP, make sure you wire the set to a 2 ohm load.

I would actually recommend two T1D412's wired to a 1 ohm load for the T1500-1BDCP. If you have the cash to spring on that gear than getting the most bang is best. Two T1D412's is 1600W RMS, the birth sheet for most if not all T1500-1BDCP's is over 1700W RMS at 1 ohm.

OFFLINE

Originally Posted by John Nolcox:

Originally Posted by Steve Terry:
For two T1D212's I would recommend using one T1500-1BDCP, make sure you wire the set to a 2 ohm load.

I would actually recommend two T1D412's wired to a 1 ohm load for the T1500-1BDCP. If you have the cash to spring on that gear than getting the most bang is best. Two T1D412's is 1600W RMS, the birth sheet for most if not all T1500-1BDCP's is over 1700W RMS at 1 ohm.

Sure, if he was buying T1D412's then he could also run the amp at 1 ohm.  I got the impression from his first post that he already ordered/purchased the 2 ohm subs,  that amp is the best choice for either set of those T1’s.