| 02/04/2012 2:32 pm |
NEWBIE
Regist.: 02/04/2012
Topics: 1
Posts: 0
 OFFLINE | I have a power 500a2 amp it works great when you turn the volume up. but when its turned down the right channel will cut in and out. everything is wired correct i have 2 battery next to the amp so i know power is no issue. and speakers are brand new and work fine on other amps even higher power ones. i took the amp apart and can not see any physical damage or burn spots on the board. anyone know what could be up. or should i take the sludge hammer to it. |
|
|
| 02/05/2012 3:12 am |
Senior Member
Regist.: 11/09/2011
Topics: 0
Posts: 47
OFFLINE | get it repaired |
|
|
| 02/06/2012 11:41 pm |
Junior Member
Regist.: 12/10/2011
Topics: 2
Posts: 17
OFFLINE | Take the rear cover off and see if one of the rca jack ground pins is broken away from the board. Is there any DC on the bridging terminal of that channel? |
|
|
power 500a2, right channel cuts in and out
OFFLINE
